Tooled newest Clipper Ship Leather Belt

This nautical sailing Tooled Clipper Ship Leather Belt is hand tooled and dyed with a 4 step antique hand dye process bench crafted by Leathersmith Jeff Taylor from Cellar Leather on Cape Cod. It is 1-3/8" in width and comes with a solid brass or satin silver plain buckle and has screw posts or snaps to change out buckles. Made in USA

CHOOSING YOUR BELT SIZE

Method A:

Measure a belt that you are currently wearing from the tip of the buckle to the hole most often used.

This measurement will tell you what size to order. If you are between sizes, order the larger size.

Method B:

Using a cloth tape measure, measure around your waist going through the loops of you pants and pull it just to (not too tight, but not too loose). For example: If the measurement is 34″ than order a 34″. If in between sizes, order the larger size.

Method C: (not recommended)

Until recently, Cellar Leather suggested that our customers order a belt two inches larger than their pant size. In recent years, this method has become less reliable. One explanation is that pants manufacturers may have changed their sizing standards or the standards are not the same from one manufacturer to the next. This is also true of belt manufactures. If your current belt is a 34″, it is not necessarily true that a Cellar leather 34″ belt will fit the same. Use Cellar Leather method A or B to determine your belt size

Belts are custom made. Sizing is your responsibility, Please measure carefully and newest ask any questions ! Authorized Exchanges may be charged return shipping and sizing mistakes a 20% restocking fee. Call us with any questions @ 508-771-5458